TLMP-98 Replacement

The Sensor incorporates a loop powered solid state differential pressure sensor which measures the level of liquid in your tank & provides a 4-20ma output proportional to tank height. 316 stainless steel housing 38mm dia. Sensor powered from +10 to 36 v dc that is supplied from the Instrument. Plug in terminal on top for 2 core shielded cable to display. Sensor can be top or bottom mounted. ½” BSP t(m) mounting thread. Suitable for Fuel, Fresh, Grey, Blackwater & Lube Oil etc. Suitable for tanks, up to a depth of 3,000mm. Sensor is custom built to your tank depth and supplied calibrated ready to screw in.

Top Mounted options available

for units with Bottom mount, we now sell adaption kits

BG98 Replacement

New BG98

OLD BG98

20 LED colour coded bar graph display of Tank Level.

• Housed in compact flush mount modules 160×80mm.

• 4 output alarms with indication light

  (High High, high, Low and Low Low)

• Modules for Fuel, Fresh, Grey, Blackwater, Oil tanks etc.

• Simple to install with terminals on rear for connection to power (12 or 24 vdc and 240Vac) & TLMP-98 Tank Level Monitoring Probe.

Bottom mount sensor replacement

About:

look at the gauge and it tells you what level your tank is at, with the highest of commercial rated accuracy

no apps, no wifi, just Simple, easy and reliable

no setup, no headache menus or buttons to press, no commissioning needed, that’s all done before it leaves, leaving you with a plug and play system

all you need to do is insert your Pressure sensor, have the two core going from your sensor to your gauge (yes you can use your existing ITIM 2 core cable guided that it isn’t damaged or corroded ext.)

the cable from your sensor to your gauge can be Over 100’s of meters long without any loss because it uses a 4-20mA signal instead of traditional voltage

and have a power supply to your gauge 12VDC, 24VDC, 220VAC, 240VAC and your set, its that simple, straight away your gauge is lit up and working

works with all Tank shapes, Linier, Non linear, or even V shapes

The ultimate Aussie 2 year warranty for every order, if you order 8 gauges 8 probes we build 16 probes and 16 gauges and hold the extra in our warehouse if you experience any issues we can send out a replacement straight away without any delays of rebuilding ext.

Our Guarantee, we wont sell you a gauge or tank monitoring system you wont be happy with, when you order we run through your entire boat and all its tank systems to configure the best solution for your vessel from motor cruisers, race yachts, fishing trawlers, passengers ferries to ships we have a tank system that suits you

need a quote?

call 0418 327 403